Do-it-yourself paint projects are presently one of the trendiest makeover initiatives in North America, but, as you might imagine, these undertakings are rife with flubs, errors, and gaffes. Highlighted below are the typical omissions and lapses in judgment that can turn seemingly straightforward painting plans into costly disasters:
- Forgetting to clean and sanitize the walls before applying the initial layer of paint or primer, which can cause powdery particles, hair follicles, and sediment to lurk beneath the surface.
- Failing to prepare for the inevitable drips, splatters, and splashes that can stain your furniture and floors. Some drop cloths, carpet coverings, and tactfully positioned painter’s tape can go a long way in this regard.
- Dunking the entire brush and satiating the full length of the bristles. If you drench the whole brush, you won’t be able to avoid trickling paint, sullying your hands, and wasting a ton of lacquer. You should never plunge more than a third of the bristles into the paint.
You don’t have to push the panic button if you’ve mottled your carpets with some paint, but it’s important to act quickly in order to resolve the issue.
Rectifying Water-Based Paint Blots
If you notice a stain while it’s still somewhat damp, you should grab a wet paper and softly dab the mark with moderate pressure – don’t scour or vigorously rub the paint. On the other hand, if the blemish has dried and adhered to the fibers of your carpet, you will need to perform the following steps:
- Fill a drinking glass with hot water and add a tablespoon of dish soap.
- Pour a little bit of the solution onto the stain and let it rest for three or four minutes.
- Get a sharp, non-serrated knife and start scraping the softened paint.
- If the stain isn’t sliding off with ease, you might want to get a humidifier or steamer and direct it at the paint while you continue scraping.
Water-based paints will react to moisture, but don’t flood the area.
Tackling Latex Paint Spots
Latex paint is a bit more problematic due to its resilience and elasticity. Perform the following steps to remove it:
- Pour tepid water into a cup and then squirt some mild hand soap into the vessel – do not use powerful dish detergent.
- Dip a towel or rag into the cup and then delicately wipe from the edges, stopping once you reach the middle.
- Work in a circular motion around the perimeter of the mark, pushing towards the center of the spot.
- Allow the moistened area to dry completely and then vacuum the remaining particles.
You may have to repeat these steps several times to eliminate latex paint spills.
Addressing Oil Paint Messes
If the oil stain is still relatively fresh, you can scrape most of the pigment off with a putty knife, but here’s a rundown of how to address a stagnant oil blemish:
- Get a canister of turpentine and apply a little bit of the solution to a durable rag.
- Avoid soaking the entire rag, because it will force the paint deeper into your carpet.
- Dab the stain tenderly until you start seeing the paint color on the cloth.
- After eliminating the brunt of the mark, wipe your carpet down with cold water and a mild cleanser.
Irrespective of what type of paint you happen to be using, be very vigilant and try to attack stains as soon as they happen – timely action is critical.